Search for a command to run...
Series
A series of posts on creating drivers in embedded Rust
This post is the last of the series on creating a platform-agnostic driver for the MAX7219 LED Driver IC. This brings us to step 5 for the planned series of posts: Create simple code to configure and test the MAX7219 with a simple application. Link ...
After successfully implementing the platform-agnostic driver for the MAX7219 LED Driver IC in the previous post, we move on to step 4 of the series of posts: Create simple code to configure and test the MAX7219 with a simple application. Link to Pos...
Introduction In this post, I continue the work I started in an attempt to create a platform-agnostic driver for the MAX7219 LED Driver IC. To reach that goal, as a reminder, here are the steps I had laid out for the series: Create simple code to con...
Introduction In this post, I continue the work I started in the previous post where I created a simple SPI application driving an LED dot matrix through the MAX7219 LED Driver IC. The goal ultimately was to create a platform agnostic driver for the M...
Introduction This blog post is the start of a new series where I explore the creation of platform agnostic embedded-hal drivers. As a start, I'll be working with the MAX7219 8-digit LED display driver. For the purpose of testing, I will also be using...
